Omag Area Cut | Fabrication Machinery

This work center has been thought for the purpose to offer in a small space, a machine capable of being able to carry out all the operations required to a laboratory both small and medium size.

This machining center has been designed with the aim of being able to offer in a single space a machine capable of being able to carry out all the processes required of both a small and medium-sized laboratory.

This work center has been designed with the aim of offering, in a single space, a machine capable of carrying out all the necessary operations in a small or medium-sized laboratory.

FASTCUT

The cutting geometries can be imported in standard DXF format, or in CVS format (simple spreadsheet).

Once the cutting geometries are defined, the next step is to position single elements in the cutting slab, the NESTING function performs this operation automatically, however the user can always customise the cut following any veins in the material.

Optimising the cut means reducing material scrap to a minimum and thus not having to manually intervene during the cutting phases. The AREAMULTICUT_DUAL version automatically identifies all of the cutting lines that can be simultaneously performed from both heads. The support table (with belt) turns so that all cutting combinations are possible.

The software makes it possible to easily and intuitively relaunch machined pieces that have flaws.

The cutting geometries can be imported either in standard DXF format or in CVS (simple spreadsheet) format.

Once the cutting geometries have been defined, you move on to the choice of positioning in the cutting plate of the individual elements, the NESTING function performs this operation automatically, the user can still customize the cut respecting any grain of the material.

Optimizing the cut means reducing material waste to a minimum and therefore not intervening manually during the cutting phases. The AREAMULTICUT_DUAL version automatically identifies all the cutting lines that can be carried out simultaneously by both heads. The support table (belt) by rotating ensures that all cutting combinations are possible.

The software allows in a simple and intuitive way to relaunch the machined pieces with anomalies.

Cutting geometry can be imported either in standard DXF format or in CVS format (a simple spreadsheet)

Once the geometry of a cut is defined, the position of the cutting blade of the singular elements is chosen, the NESTING functionality executes this operation automatically, in any case the operator can always customize the cut respecting possible veins of the material.

Optimizing the cut means minimizing material waste and then not intervening manually during the cutting phases. The AREAMULTICUT_DUAL version automatically identifies all the cutting lines that can be performed simultaneously by both heads. The rotating support table (roller) makes all cutting combinations possible.

The software allows in a simple and intuitive way to return the worked pieces that present anomalies.

2. PC CONTROL

PC CONTROL 19 “Touch Screen:

The large size of the screen allow a detailed overall view of both, machine function keys and the geometry of the work pieces

19 ”Touch Screen control PC:
The large size of the screen allows a detailed view of both the functions and the geometries of the pieces to be machined.

PC de control de 19” Touch Screen:
The large dimensions of the screen allow a detailed view of both the functions and the geometry of the parts to be processed.

PLANPROBE

With the plane probe (PLANPROBE/TOUCH2D) the thickness of the slab is automatically memorised, this function provides a precise cut, especially for 45° cuts.

With the planarity feeler (PLANPROBE / TOUCH2D) the slab thickness is automatically stored, this function allows a precise cut, especially for 45 ° cuts. The tool probe

With the flatness probe (PLANPROBE)/TOUCH2D) the thickness of the sheet is automatically stored, this function allows a precise cut, in particular for 45° cuts with the tool probe.

3. FOTO FAST

FOTO FAST is a function for digital photographic memorisation of slabs of any material, using a digital camera. Thus the colours can be balanced, the brightness and contrast optimised, shadows removed and areas identified that should not be considered during machining.

By activating the VEIN function, the designing and consequently the cut, can be performed along the veins of the material of various slabs.

The acquired image is able to automatically identify the edges of the slab and thus recognise its measurements.

FOTO FAST is a function for digital photographic storage of plates of any material, using a digital camera. It is therefore possible to balance colors, optimize brightness and contrast, remove shadows, identify areas that should not be considered during processing.

With the activation of the VEIN function, the design and consequently the cutting can be performed respecting the grain of the material of different slabs.

The acquired image is able to automatically identify the contours of the plate and therefore recognize its measurements.

FOTOFAST is a function for the digital photographic storage of sheets of any material using a digital photographic camera. Therefore, you can balance colors, optimize brightness and contrast, remove shadows, identify areas that should not be considered during processing.

With the activation of the VEIN function, the design and therefore the cut can be made respecting the veins of the material of different sheets.
The acquired image is able to automatically identify the edges of the sheets and then recognize the measurements.

RADIUSPROBE

The tool probe (RADIUSPROBE/PRESETTING) acts so that the system operator only has to set the disc or profiling tools measurements in the tool table, while the machine technology autonomously checks, tests and updates the real data. This is especially useful for a worn disc.

The tool probe (RADIUSPROBE / PRESETTING) causes the plant operator to limit himself to setting the disk or profile tool measurements in the tool table, while the machine technology autonomously checks, checks and updates the real data , particularly useful in case of disc wear.

The probe tool (RAOIUSPROBE/PRESETTING) makes sure that the implant operator is limited to entering the disc or tool-to-profile measurements in the tool table, while the machine technology independently verifies, controls and updates the actual data, particularly useful in the case of disk wear.

4. HANDLING VACUUMS

Optimising the cut means reducing material scrap to a minimum and thus not having to manually intervene during the cutting phases. SAMR is a device (applied to the bridge machine) by vacuum system, able to move the pieces cut or to be cut on the work table or on the external roller conveyors

Optimizing the cut means reducing material waste to a minimum and therefore not intervening manually during the cutting phases. SAMR is the suction cup system, able to move the pieces cut or to be cut either on the work table or on the unloading roller conveyors

Optimizing the cut means reducing material waste to a minimum and then not intervening manually during the cutting phases. SAMR is the system with a suction cup, capable of moving the cut pieces or cutting both on the work table and on the discharge rollers.

CNC Routers

5-Axis CNC Saws

5-7 Axis CNC Work Centers

Water Systems

Dust Walls (Water & Air)

Single Wire & Multi Wire Saws

Single Blade & Multi-Blade Gang Saws

Block Tilter

Thinstone Saws

Stone Splitters - Manual

Stone Splitters - Automatic

Stone Splitters - Horizontal

Pitching Machines

Stone Crushers

Crane Systems

Laser Templating Systems

Edge Polishers

This work center has been thought for the purpose to offer in a small space, a machine capable of being able to carry out all the operations required to a laboratory both small and medium size.

FASTCUT

2. PC CONTROL

PLANPROBE

3. FOTO FAST

RADIUSPROBE

4. HANDLING VACUUMS

Translate this page into English, French, or Spanish:

Contact

Address

Phone

Email

Social

subscribe